E2C – Easy 2 Clean

Unpleasant solvent smells?
THESE TIMES ARE NOW OVER!

The future of solvent cleaning starts with B-TEC and E2C – Easy 2 Clean.

Request now

E2C – Easy 2 Clean

The new B-TEC E2C – Easy 2 Clean paint and coating cleaner is the alternative to highly volatile, flammable solvents in the paint spray gun washer.

Mixed ready-to-use in 20 litres in combination with the automatic B-TEC washers, E2C cleans solvent-based (2K) paints such as fillers and clearcoats from the spray gun within a very short time.

Easy 2 Clean is not only convincing due to its outstanding cleaning performance, but compared to conventional solvents, it does not require a classification according to the CLP regulation, as it is non-flammable*. This considerably reduces the potential hazards in the workplace and protects the user.

With its low VOC content of less than 15 % and its pleasant smell, extraction is not absolutely necessary (subject to local regulations) – this saves compressed air and makes the location of the washer extremely flexible. E2C is also excellently suited for manual cleaning.

THE ALTERNATIVE TO CONVENTIONAL THINNER!

A complete CLEANING CONCEPT

E2C is not only an outstanding cleaning fluid, but also completes the B-TEC cleaning concept for cleaning solvent and water-based paints.

When using both types of paint, the two cleaning agents B-TEC E2C for solvents and B-TEC H2O-RK for water-based paints can be combined in the B-TEC d-800 and SUMO washer combinations. By separating solvent- and water-based paints, there is not only no compromise in cleaning performance, but also a more cost-effective overall concept for cleaning the paint spray guns.

On the water-based paint side of the B-TEC washers, the B-TEC H2O-RK can be used to automatically and manually clean even dried water-based paints effortlessly within a very short time. At the same time, automatic and manual cleaning of the filler or clearcoat gun on the solvent side is possible with B-TEC E2C.

In contrast to combined cleaning fluids for solvent and water based paints, B-TEC cleans with cleaning fluids that are precisely designed for the respective application and always lead to perfect cleaning results – without the need for complex filtration or sedimentation.

Highest safety

Due to their low VOC value, VOC-reduced cleaning solutions have an oily consistency, which means that the cleaners do not dry easily in the air.

Therefore, the air channels of the spray gun must be particularly well protected during the automatic and manual cleaning process – it is essential to prevent cleaning agents from entering the air channels.

In addition to the well-proven B-TEC air flow system, the E2C cleaning concept therefore relies on a special stainless steel compressed air coupling with a highly resistant gasket, not only to seal the air channels of the paint spray gun 100 % during automatic cleaning, but also to prevent VOC-reduced cleaner from entering the air channels during manual cleaning and drying.

The future of solvent cleaning starts with B-TEC and E2C – Easy 2 Clean.

Main Advantages


PERFECTLY ADAPTED TO
SOLVENT-BASED PAINTS

Cleaning fluid for fillers and solvent-based paint


CLASSIFICATION-FREE AND ENVIRONMENTALLY FRIENDLY

Classification-free in accordance with the CLP Regulation and based on renewable resources.


PLEASANT SMELL

No offensive solvent smell in the paint mixing room.


VOC REDUCED

Highly VOC reduced (VOC content: <15 %)


STRONG CLEANING POWER

Excellent cleaning performance with automatic and manual cleaning.


LONG SERVICE LIFE

Up to 10 times longer service life compared to conventional solvents


NOT SELF-IGNITING

*not self-igniting (flash point > 70°C / boiling point >= 170°C)


REDUCED HAZARD POTENTIAL

Reduction of potential hazards in the workplace

Videos + Downloads

Review of B-TEC E2C by German Painters Journal „Lackiererblatt“